|
| Features | Test Method | Results |
| Application temperature | / | +15°C to +25°C |
| Tensile strength (MPA) | ASTM D882 | 35 |
| Elongation (%) | ASTM D882 | 160 |
| Holding Power(h) | paste on steel board,hang on by 1kg weight under 29℃ and 55%, GB/T4851-1998 | ≧18 |
| Initial Tack(N/25mm)) | under 24℃ and 26%, GB31125-2014 | ≤16 |
| Hardness(P) | / | ≧22 |
| Heat Resistance | / | 80℃ |
| Humidity Resistance | 120 hours exposure | No Detrimental Effect |
| Saltspray Resistance | 120 hours exposure | No Detrimental Effect |
| Water Resistance | 120 hours exposure | No Detrimental Effect |
| Chemical Resistance | 1hour diesel oil immersion,4hours antifreeze immersion | No Detrimental Effect |
| Once cut to size then line up the vinyl on the surface of the project, then peel around 10-15cm of the backing paper from the top of the film. Line up the sheet on the item and stick the top strip to the item. | |
| You can then pull the paperback down from the underside while using the squeegee on top to push the vinyl down on the surface. If you come across any bubbles just push them out with the squeegee to the closest side. | |
| If the project has curves or bends you can use heat from a heatgun to soften the vinyl and you can then stretch the film around the curve. Do an overlap behind the object if possible to keep it secure. When possible do a test with a cut off of the vinyl so you have practice before doing the larger item. | |
|
As these are thicker than normal vinyls we recommend using an adhesive promoter like 3M 94 Primer on all edges, bends and recesses to secure the vinyl for a longer lifespan. This primer should be available from your local 3M distributor or online from a local supplier. |
|
|
| For Bare Wood like MDF or Ply we recommend sealing the surface first. Bare Wood can be a porous material so the vinyl will not adhere properly unless the wood is completely sealed with a primer, varnish or paint. |
Aftercare
Customer Reviews
I ordered a few samples and they arrived within a week and were all good quality material. I ended up going for the "oak" effect. It was really easy to work with, has an excellent finish and is high quality material. I was replacing one from another shop that was marble effect and I was not looking forward to re doing it because it was so horrible to work with. This was a different experience!! Looks great!
Customer Reviews
I ordered a few samples and they arrived within a week and were all good quality material. I ended up going for the "oak" effect. It was really easy to work with, has an excellent finish and is high quality material. I was replacing one from another shop that was marble effect and I was not looking forward to re doing it because it was so horrible to work with. This was a different experience!! Looks great!